I have done my MS in Electrical Engineering from SUNY-Buffalo with specialization in 
Signal Processing and Communication. I also have 3 years experience in Embedded System. I 
am looking for design and/or development position in Embedded System, DSP, Digital 
Design, Image Processing and/or Communication. The following is my resume:

SASWATI DAS
88 Englewood Ave, Upper Apt., Buffalo, New York- 14214, USA; Email: sdas4@buffalo.edu;
Webpage: www.geocities.com/meetsaswati ; Mobile no.: 716-430-3338
OBJECTIVE:
To obtain a design and/or development position in embedded systems, computer 
architecture, signal processing, and/or
communications in a company that offers a creative and challenging environment for 
technological advancement.
EDUCATION:
• MS in Electrical Engineering; State University of New York at Buffalo; Specialization: 
Signal Processing and
Communications. GPA: 3.534 (Graduation date – Feb 1, 2009)
• Bachelors of Engineering in Instrumentation; Gauhati University, India; Aggregate: 77% 
(1st Class, Honors) ;
University Rank – 2
TOTAL WORK EXPERIENCE: 3 years
• Project Engineer – Embedded Group; Dana India Technical Centre (DITC), a 100% 
subsidiary of Dana
Corporation, USA (www.dana.com) ; March 2005 to July 2007
• Trainee Engineer – Research & Development (R&D) Section – Embedded Group ; HPL Socomec 
Pvt. Ltd.
(www.hplindia.com) ; Dec 2004 to Feb 2005
• Team Leader – R&D (Hardware) Section - Microcomm India Limited, New Delhi
(www.microcommindia.com); Sept 2004 to Nov 2004
• Vocational Trainee – Instrumentation Sector; Indian Oil Corporation (www.iocl.com), 
Guwahati ; Aug 2002
to Sept. 2002
RESEARCH EXPERIENCE:
• To improve finite length accuracy for fixed point FFT via error feedback. Mentor: Dr. 
Adly T. Fam
• To develop a complicated filter with less area and power utilization than conventional 
ones from a seed or kernel filter
having simple computational properties, via successive iterations. Mentor: Dr. Adly T. 
Fam
EXPERIENCE HIGHLIGHTS:
• 32-bit Digital Signal Processor (DSP): TMS320F2810PBKA
• 16-bit Mixed Signal Processor (MSP): MSP430F1232IPW
• 32-bit Microcontroller (MCU): MC9S12XEP100
• 12-bit MSP: C8051f021
• 8-bit MCU: AT89C4051, AT89C2051, AT89C51RC2, ST72324K, ATMEGA128, MC9S08QG4, 
MC68HC908QT4.
• Serial Communication Protocols and Standards: SCI, SPI, I2C, MODBUS, REFLEX, RS232, 
RS485.
• Encoding Formats: NRZ format, Manchester Encoding format
• Compilers/WinIDE: Keil uVision3, Metrowerks CodeWarrior (Version: 5.6.1.1506), 
Freescale CodeWarrior
(Version: 5.7.0), C2000 Code Composer Studio (Version: 2.20.00), IAR Embedded Workbench.
• GUI: ICD08SZ (Version: 2.14) for In-Circuit Debugging, Prog08SZ (Version: 2.12) for 
Flash Programming,
SDFlash Version 1.60.00 for Flash Programming through Spectrum Digital JTAG Emulator, ST 
Visual Stick -
Programmer, Winbus V1.1 serial link tester.
• Debuggers: USB-MON08-Multilink for HC08 MCU, USB HCS08/HCS12 Multilink (with BDM 
Cables) Rev. B 0105
• Emulators: Spectrum Digital XDS510PP (with JTAG cables)
• Languages: C, MATLAB, Assembly language, C++, Data Structures, Verilog
• Simulation Tools for IC and FPGA : Ansoft Designer SV2, ModelSim XE III 6.3c
• FPGA: Xilinx Spartan 3E- 100
• Circuit and Layout CAD Tools : Xilinx ISE 10.1, Protel
• Operating Systems: Microsoft Windows.
• Software packages: MS Office, MS Visio Studio 2003 for flow-charts.
• Oscilloscopes and Signal Generators: TPS2024
• QMS: ISO 9001
PROFESSIONAL EMPLOYMENT: PROJECTS
Company Name: DITC; Customer Name: Bendix Corporation.
• Developed a customized flash-loader for MC9S08QG4 MCU using a 32 bit DSP, TMS320F2810 
as the master.
The project is innovative as the master communicates with slave using only the two power 
line carrier wires.
• Developed a customized bootloader for MC68HC908QT4 MCU using a 32 bit DSP from Texas 
Instruments,
TMS320F2810 as the master. The project is being considered for patent by our company.
• Converted the manufacturer-supplied Slave side code of Developer’s Serial Bootloader 
for MC68HC08 family of
microcontrollers from Assembly Language to C language.
• Developed a complete firmware from scratch for the fail-safe module of the main 
Electronic control unit (ECU) of a
tractor which uses MC68HC908QT4 MCU as the controller of the fail-safe module and 
MC9S12D64 16-bit
microcontroller as the main controller of the ECU unit.
• Developed firmware for the Wheel End Sensor of a trailer (consisting of the 8-bit MCU 
MC68HC908QT4) which resides
inside the wheel axle and provides wheel parameters (wheel speed, rotation direction, 
temperature, acceleration, etc.)
to the main ECU of the trailer (consisting of the DSP- TMS320F2810PBKA) using a standard 
two wire interface.
• Provided maintenance of firmware for the ECU of a trailer which uses a 32-bit DSP viz. 
TMS320F2810PBKA as its main
controller and a 16-bit MSP viz. MSP430F1232IPW as the controller of its fail-safe 
module.
• Developed a firmware module for spectral analysis of signals feed into the 32-bit DSP 
viz. TMS320F2810PBKA (used as
the main controller of ECU of a tractor) using DFT by correlation method.
• Developed firmware for a 32-bit MCU viz. MC9S12XEP100 used as the controller of the ECU 
of the tractor which
performs hardware testing, manual and automatic control and faults detection of the 
output drivers like lamp, buzzer
and solenoids valves used for maintaining proper tire pressure under different road 
conditions.
Company Name: DITC; Customer Name: General Motors.
• Worked in the firmware development and maintenance of a Data Logger and Operator 
Interface Module (OIM) used in
the security system modules of automobiles.
Company Name: HPL Socomec Pvt. Ltd.
• Developed firmware (in Assembly language on ST72324k MCU) for reading and writing of 
parameters of 3 phase
energy meter using half duplex RS485 serial communication and MODBUS protocol.
• Developed firmware (in Assembly Language) to display the parameters of the Energy meter 
on a single line LCD
GDM063 (based on HT1621 LCD Driver) & a three line LCD YM1622 (based on HT1622 
controller) using ST72324k
MCU.
Company Name: Microcomm India Limited.
• Participated in designing a Data Logger used for processing inputs from Environmental 
Sensors. The circuit uses an 8
channel, 16 bit ADC converter (ADS8344) to digitize analog inputs which are then 
processed using ATMEGA128 MCU
and a CPLD.
ACADEMICS:
Graduate Projects:
• Developed an algorithm for representing 3D binary images by octree using MATLAB.
• Implemented S-parameters of GaAs HEMT Avago ATF-35143 in Ansoft Designer SV environment 
assuming 50 ohm
impedances of source and load and plotted graphs for S-parameters, noise figure and 
stability factor within 1-10 GHz
range and then improved the stability factor by inserting a small inductor as negative 
current feedback.
• Generated 4 independent Rayleigh fading channels for a non-coherent MIMO system with 2 
transmit antennas using
Jakes’ fading simulator and then compared the symbol error rate versus SNR curves for 1 
and 2 receive antennas.
• Designed an electronic combination lock using Xilinx Spartan-3E – 100 FPGA. Programming 
is done in Verilog.
Undergraduate Project:
• Devised a fiber optic sensor for measurement of air flow rate through high pressure 
tunnel.
• Devised an 8085 microprocessor based object counter.
Graduate Coursework:
Digital Signal Processing, High Speed Communication Circuits, Probability and Stochastic 
processes, Computer Vision and
Image Processing, MIMO Wireless Communications, Principles of Modern Digital 
Communications, Computer Architecture
HONORS AND ACHIEVEMENTS:
• Our Team in Dana India Technical Centre received ‘A’ (Excellent) Grade in the half-
yearly Customer Satisfaction
Feedback Report in 2005 and 2006 and won the Revolving trophy in the Internal ISO audit 
held quarterly for Best
QMS Performance in 2006.
• Tuition Scholarship from the University of Rochester in Fall 2007.
• Had got offer of admission for direct PhD program from University of Minnesota-Twin 
Cities and State University
of New York – Stony Brook and for MS program from University of California – Irvine and 
University of
Massachusetts - Amherst in Fall 2007.
• Qualified GRE test with a score of 800/800 in quantitative section.
• Qualified Graduate Aptitude Test of Engineering-2004 with 91.24 percentile and All 
India Rank of 461.
• Qualified Common Admission Test - 2003 with 98.13 percentile in Quantitative Section 
among approx.
150000 candidates in India.
• Certificate of Excellence from Children Trust of India for remarkable performance in 
All India Talent Search
Examination - 1992.
• Awarded Merit Scholarship by Gauhati University from 2000-2003
AWARDS AND COMMUNITY/LEADERSHIP ACTIVITIES:
Association with Rotary Club, India, Help age India, Don Bosco Association, India; 
Mentorship in Laboratory &
Research Project of Excelsior Scholar students held by University of Buffalo; Winner of 
State Level Quiz
competition and several poem-writing competitions; Publication of poems & articles in 
Hindi and English; Winner in
State Level Athletics – Short Distance Race, Relay Race and Long Jump, Participation in 
Discussion and Debates.